Specification :
Cast Nylon Rods is generally superior to extruded Nylon-6. Since it is made by direct polymerisation of caprolactam, the polymer has never been melted and thus has been subjected to any thermal degradation. In addition, its molecular weight (up to 10,00,000) is several fold higher than molecular weight of extruded nylon- 6(30,000). Since physical properties of Thermoplastics improve with increasing molecular weight, it has Higher tensile and compressive strength, Greater hardness and modulus of elasticity, Higher wear resistance, Lower distortion at Higher temperatures,Lower moisture,Better dimensional stability, Better resistance to solvents than Extruded Nylon 6.Thus for Bearings,Gears and Structural applications.
Nylon rods and sheets are used in various industrial application including textile, railways, automobile, food processing, electrical and electronics, defence, appliance manufacturing industries and more.
Our range of nylon rods, sheets and profiles are available in following sizes : Rods [ White ] : 6 MM – 300MM “ OD; Length: 300 MM & 1000 MM : Rods [ Black ] : 12.5 MM – 150MM; Length: 300 MM & 1000 MM :
Specification :
Nylon Sheet White that is produced by anionic polymerization of lactams by casting process. Cast Nylon Sheets are offered in a range of thicknesses between 8mm - 100mm in sizes: 300mm x 300mm, 1000mm x 1000mm, 1000mm x 500mm, 1000mm x 2000mm and bigger plates. Many grades with additives and fillers are produced as per application orientation. Specific colors are offered clearly defining the grades, as natural cream/ ivory gold color as plain/ unfilled, UV stabilized grade in black color, self-lubricating grade in green color, Molybdenum Disulphide (MoS2) filled in grayish black color, heat stabilized mono-cast (MC) Nylon in blue color (especially developed for Japanese market) and Yellow color Nylon sheets for high impact applications. Any other colors can be produced as per application demand. These Nylon sheets are supplied as stock shapes, cut-to-size blocks, base plates/ pallets, flat strips, semi-finished profiles and finished machined components.
Size : 6 MM Thick – 100 MM Thick; 300 x 300 MM; 600 x 600 MM; 1000 x 1000 MM.
Know more...
Specification :
Nylon Sheets that is produced by anionic polymerization of lactams by casting process. Cast Nylon Sheets are offered in a range of thicknesses between 8mm - 100mm in sizes: 300mm x 300mm, 1000mm x 1000mm, 1000mm x 500mm, 1000mm x 2000mm and bigger plates. Many grades with additives and fillers are produced as per application orientation. Specific colors are offered clearly defining the grades, as natural cream/ ivory gold color as plain/ unfilled, UV stabilized grade in black color, self-lubricating grade in green color, Molybdenum Disulphide (MoS2) filled in grayish black color, heat stabilized mono-cast (MC) Nylon in blue color (especially developed for Japanese market) and Yellow color Nylon sheets for high impact applications. Any other colors can be produced as per application demand. These Nylon sheets are supplied as stock shapes, cut-to-size blocks, base plates/ pallets, flat strips, semi-finished profiles and finished machined components.
Size : 6 MM Thick – 100 MM Thick; 300 x 300 MM; 600 x 600 MM; 1000 x 1000 MM.
Specification :
We offer ultra high molecular weight UHMW Sheet polyethylene which is a thermoplastic; widely used in various industrial applications. These are acknowledged for various qualitative features such as: High toughness / High impact strength / Highly resistant to corrosive chemicals / Low moisture absorption / Low coefficient of friction / Self lubricating / Resistant to abrasion (15 times more resistant to abrasion than carbon steel) / Odorless / Tasteless / Nontoxic
Size : 6 mm to 60 mm, 1000 x 1000, 1000 x 2000, 1250 x 1000, 1250 x 2000, 1250 x 3000
Know more...
Specification :
We offer ultra high molecular weight (UHMW) polyethylene which is a thermoplastic; widely used in various industrial applications. These are acknowledged for various qualitative features such as: High toughness / High impact strength / Highly resistant to corrosive chemicals / Low moisture absorption / Low coefficient of friction / Self lubricating / Resistant to abrasion (15 times more resistant to abrasion than carbon steel) / Odorless / Tasteless / Nontoxic
Size : 20mm to 300mm, 1mtr Long
Specification :
We offer highly sophisticated engineered Delrin which is an engineering plastic. These are known for various qualitative features
Light weight / Low friction / Wear resistant / Thermoplastic with good physical & processing properties/ Capable in operating in temperatures in excess of 90 OC (200 OF)
Polyacetal Rods Characteristics :
Specification :
Different applications of our engineered Delrins are as follows:
In the food industry / Extensively in paintball markers / In the manufacturing of Irish flutes / In the heyday of the instrument / Used to create body-piercing jewelry
Polyacetal Sheet Characteristics :
Specification :
Polypropylene is an economical material, which delivers a combination of superior physical, chemical, mechanical, thermal and electrical properties. Compared to low or high-density polyethylene, it has high tensile strength and operating temperature.
polypropylene is a crystalline polymer noted for excellent chemical resistance. It is used extensively in chemical processing, chemical storage, metal finishing, electroplating, galvanizing industry. It is also used to make engineering components such as nozzles, impellers, pumps casing jigs & fixtures. It find extensive use in orthopaedic and prosthetic devices and semi conductors and clean room industry. It is being used to make components and consumer articles via vacuum and thermoforming process.
Rod Size : 16 mm to 400 mm dia x 1 meter length
Specification :
Light in weight, resistant to staining, & low moisture absorption rate, Polypropylene offers excellent resistance to organic solvents, degreasing agents and electrolytic attack. It a tough, heat-resistant, semi-rigid material, suitable for the transfer of hot liquids or gases.
Sheet Size : 1000 x 2000 mm, 8ft x 4ft, 1mm-100mm thikness
Specification :
Due to our immense capability in this work domain, we have brought forth a huge variety of High Density Polyethylene Rods.
Features : Perfect finish, Industry proven design, Longer life, Optimum quality"
Specification :
PE comprises of HDPE Sheets. These exhibit the properties of excellent impact strength,abrasion resistance, low coefficient of friction.
Specification :
Bakelite sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with phenolic resin. These layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics or unwoven fabrics. When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated plastic.
Technical requirement for surface :
The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on the end surface are not allowed . The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on the end surface are not allowed .
Feature :
High mechanical properties, and oil resistance and certain dielectric property. Thermal rating is 120, and temperature resistance : 130 centidegrees
Size : 6mm to 200mm dia, 300mm length
Specification :
Technical requirement for surface :
The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on the end surface are not allowed . The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on the end surface are not allowed .
Feature :
High mechanical properties, and oil resistance and certain dielectric property. Thermal rating is 120, and temperature resistance : 130 centidegrees
Size : 3mm to 50mm thickness, 4ft x 4ft, 8ft x 4ft
Specification :
Applications :
Machined parts, jointing of structure parts and so on.
6mm to 120mm Dia, 1000mm Lenght
Specification :
Applications :
Machined parts, jointing of structure parts and so on.
6mm to 120mm Dia, 1000mm Lenght
Specification :
Applications :
Machined parts, jointing of structure parts and so on.
1mm to 50mm thiknes, 8ft x 4ft
Specification :
Special Treatment :
Metalized, Anti-UV, Waterproof, Antistatic, Cold Resistance and Anti-fog, Frosted, Heat resistance(120ºC), Double-sided Matte, Conductive
1mm and 2mm thicknes, 1350 width x 10mtr Lenght
Specification :
We deal in PVC Strip Curtain of both Blue Transparent and Crystal Clear (Fully Transparent) visibility. Air curtains are used in various applications like retaining chilled air inside the enclosure, reducing outdoor dust and fumes, to alienate insects and birds from the target area, isolating noisy machinery and toxic pollution and protecting from Ultra-voilet (UV) radiation. Our PVC curtains are mainly used in solving problems regarding visibility and doorway access in industries as varied as warehousing, cold-storage houses, hotels and restaurants, partitioning in office interiors, and manufacturing plants with huge doors. Key Features: Availability in Tansparent / Opaque visibility Alienates insects and birds from the target area Isolates noisy machinery and dust/fumes. Retention of cilled air in air-conditioned enclosures Protection from UV-radiation.
Specification :
Poly Urethene is applicable for general mechanical equipments for metallurgy, mining, petroleum, auto, construction etc. to absorb shock. It never destroys metal mould and is easy to assemble and unassembled could be an ideal spring for punchin machine and all kinds of mould.
Usage/Application: Plumbing, Single Piece Length: 3 meter, Color: Yellow, Green, Black, White, Size/Diameter: 8 mm To 300 mm, Application: Drinking Water, Utilities Water, Chemical Handling, Brand: Advance Polymer Products, Density: 1.12 to 1.25 g/cm3, Hardness: 75 to 95 Shore A, Length: 300mm to 1000mm
Specification :
Description : Amalgamating manpower and machinery, we have introduced a vast array of Polyurethane Sheets. The components offered by us are developed using tough, crack resistant, and abrasion resistant polyurethane as these lasts longer than conventional rubbers and plastics. Furthermore, we provide these components to our customers in custom-made diameters, lengths, hardness, and colors as per the requirements.
Color : Yellow, Size(FeetXFeet): Customized, Feature: Wear Resisting, Hardness: 90 +/- 2 Shore, Tensile Strength: 200 to 300 Kg/c, Elongation: 500 to 600 Percent, Tear strength: 90 to 130 Kg/cm, Working Temp: 60 to 70 degree centigrade, Melting Point: 175 degree centigrade
Size : 3 mm - 75 mm Thickness, 1ft x 1ft & 1mtr x 1mtr, Length: 1ft x 1ft & 1mtr x 1mtr
Color : Transparent, Yellow,
Specification :
20mm x 300mm Dia, 300mm Lenght
Specification :
Taking quality as our prime importance, we are engaged in importing Peek Rod. Peek is commonly specified for high temperature applications requiring combination of thermal, chemical and combustion properties. Filled grades of Poly Ether Ether Ketone (PEEK) offer enhanced tribological and other properties for demanding custom application. Alternative to fluoropolymers, these rods are applicable for manufacturing insulation materials, gears, bearings, bushes and valves.
Features :
6mm to 200mm Dia, 1000mm Lenght
